Products
Measurement Technology
Electronics
Switch Cabinet Accessories
Current-transformer-Finder
Here you can find all current transformers.
Stromwandler-Messumformer-Finder
Hier finden Sie alle Stromwandler-Messumformer.
LED-Meldetableau-Finder
Hier finden Sie alle LED-Meldetableaus.
About
Downloads
Contact
Deutsch
Products
Hier geht es zu den Produkten
Measurement Technology
Electronics
Switch Cabinet Accessories
Current-transformer-Finder
Here you can find all current transformers.
Stromwandler-Messumformer-Finder
Hier finden Sie alle Stromwandler-Messumformer.
LED-Meldetableau-Finder
Hier finden Sie alle LED-Meldetableaus.
About
Downloads
Contact
Search
Home
Products
LED-Meldetableaus
(F)LMBI-96-8
LMBI 96-8.2 3mm 24V AC/DC
LMBI 96-8.2 3mm 24V AC/DC
Request now
PDF-Export
Description
LMBI
Terminal Description E1-E16###Signal input, L/+ GND E1-E16###Reference potential signal input, N/- L, N###Auxiliary voltage input +Um, GND###Auxiliary voltage for external buttons T-GND###Reference potential für Taster LP, LQ, HQ###Input for external buttons 11 / 12 / 14###Collective output (lamp) optional mit Relaisausgängen 21 / 22 / 24###New value notification output (horn) optionally with relay outputs D+, D-###2-wire bus
Model
LMBI 96-8.2 3mm 24V AC/DC
Part Number
992220812
Housing Size
96
Number of Notifications
8
Layout
2
Front Panel
Formica Plate
Operating Signals
yes
Profibus
no
Technical data
Type
LMBI
Standard Supply Voltage
24V AC/DC
Power Consumption
5VA bzw. W
Voltage
24V AC/DC
Input Current per Channel
ca. 5mA
Contact Rating "SM"
-
LED Size
3mm
The (F)LM(B)I is a microprocessor-controlled annunciator panel that displays up to 16 optical, depending on the version. The LEDs are red as standard, or green and red in the case of the (F)LMBI annunciator with operating signal. The colours green, blue, orange, yellow and white are also available as options. Up to 127 units can be networked via an integrated 2-wire interface, thus enabling synchronised display and operation of 2032 messages. Various operating modes and the unit address can be set via the DIP switches accessible from the front, see below. In the FLM(B)I version, the labelling is done with paper strips that can be inserted into transparent pockets. All units have inputs for connecting external operating buttons with the functions lamp check, acknowledge message and acknowledge horn. Optionally available are: Integrated operating buttons, relay outputs for connecting a collective signal lamp and a horn, opto-coupler outputs that reproduce the LEDs status. With networked units, the operating keys and the relay outputs are only required in one unit. The built-in microprocessor allows flexible adaptation to special requirements.
Functions adjustable via DIP switch:
Working current/ closed-ciruit principle switchable (2 groups)
Memory on/off
First-value/new-value/last-value indication
Combined operating/ alarm signal indication
Adjustable signal delay time 1s / 3s / 10s
Unit coupling via RS485 On / Off
Device address
Name
*
Email
*
Phone Number
*
Your Message
Privacy policy
*
I have read the
Privacy policy
and acknowledge it.
Send
Close
Not found the right LED-Melde-Tableau?
Back to the LED-Melde-Tableau-Finder