LMI 96-8.1 3mm 24V AC/DC

Meldetableau LMI 96-8.1 3mm 24V AC/DC
Dimensionen LMI 96-8.1 3mm 24V AC/DC
Klemmen LMI 96-8.1 3mm 24V AC/DC

Description

LMI The (F)LM(B)I is a microprocessor-controlled annunciator panel that displays up to 16 optical, depending on the version. The LEDs are red as standard, or green and red in the case of the (F)LMBI annunciator with operating signal. The colours green, blue, orange, yellow and white are also available as options. Up to 127 units can be networked via an integrated 2-wire interface, thus enabling synchronised display and operation of 2032 messages. Various operating modes and the unit address can be set via the DIP switches accessible from the front, see below. In the FLM(B)I version, the labelling is done with paper strips that can be inserted into transparent pockets. All units have inputs for connecting external operating buttons with the functions lamp check, acknowledge message and acknowledge horn. Optionally available are: Integrated operating buttons, relay outputs for connecting a collective signal lamp and a horn, opto-coupler outputs that reproduce the LEDs status. With networked units, the operating keys and the relay outputs are only required in one unit. The built-in microprocessor allows flexible adaptation to special requirements. Functions adjustable via DIP switch: Working current/ closed-ciruit principle switchable (2 groups) Memory on/off First-value/new-value/last-value indication Combined operating/ alarm signal indication Adjustable signal delay time 1s / 3s / 10s Unit coupling via RS485 On / Off Device address
Model LMI 96-8.1 3mm 24V AC/DC
Part Number 992000822
Housing Size 96
Number of Notifications 8
Layout 1
Front Panel Formica Plate
Operating Signals no
Profibus no

Technical data

Type
LMI
Standard Supply Voltage
24V AC/DC
Power Consumption
5VA bzw. W
Voltage
24V AC/DC
Input Current per Channel
ca. 5mA
Contact Rating "SM"
-
LED Size
3mm

Terminal Description

E1-E16
Signal input, L/+
GND E1-E16
Reference potential signal input, N/-
L, N
Auxiliary voltage input
+Um, GND
Auxiliary voltage for external buttons
T-GND
Reference potential für Taster
LP, LQ, HQ
Input for external buttons
11 / 12 / 14
Collective output (lamp) optional mit Relaisausgängen
21 / 22 / 24
New value notification output (horn) optionally with relay outputs
D+, D-
2-wire bus

I have read the Privacy policy and acknowledge it.

Not found the right LED-Melde-Tableau?

Cookie settings

We are continuously improving our website and we use cookies for this purpose. For an optimal user experience, we recommend that you accept them. Otherwise, parts of the page will be deactivated in the display in accordance with data protection regulations.

Privacy policy